Building a Star Wars Shadowtrooper Helmet Kit!
We’ve had the Shadowtrooper armor kit from Anovos completed since last year, but one addition kit that we wanted to build was the helmet. Over the course of a day, Frank and Norm tackle the helmet build, showing you how to clean up the vacuum-formed parts and put them together. With only four plastic pieces, this is a great place to start on your own Stormtrooper kit!
Shot and edited by Joey Fameli
13 thoughts on “Building a Star Wars Shadowtrooper Helmet Kit!”
Leave a Reply
One Day Builds
Adam Savage’s One Day Builds: Life-Size Velocirapt…
Adam embarks on one of his most ambitious builds yet: fulfil…
Show And Tell
Adam Savage’s King George Costume!
Adam recently completed a build of the royal St. Edwards cro…
All Eyes On Perserverance – This is Only a Test 58…
We get excited for the Perserverance rover Mars landing happening later today in this week's episode. Jeremy finally watches In and Of Itself, we get hyped for The Last of Us casting, and try to deciper the new Chevy Bolt announcements. Plus, Kishore gets a Pelaton and we wrack our brains around reverse engineering the source code to GTA …
One Day Builds
Mandalorian Blaster Prop Replica Kit Assembly!
Adam and Norm assemble a beautifully machined replica prop k…
House of MCU – This is Only a Test 586 – 2/11/21
The gang gets together to recap their favorite bits from this past weekend's Superb Owl, including the new camera tech used for the broadcast and the best chicken wing recipes. Kishore shares tips for streamlining your streaming services, and Will guests this week to dive into the mind-bending implications of the latest WandaVision episod…
One Day Builds
Adam Savage’s One Day Builds: Royal Crown of Engla…
One of the ways Adam has been getting through lockdown has b…
Making
Adam Savage Tests the AIR Active Filtration Helmet…
Adam unboxes and performs a quick test of this novel new hel…
Making
Weta Workshop’s 3D-Printed Giant Eyeballs!
When Adam visited Weta Workshop early last year, he stopped …
One Day Builds
Adam Savage’s One Day Builds: Wire Storage Solutio…
Adam tackles a shop shelf build that he's been putting off f…
Show And Tell
Mechanical Dragonfly Automata Kit Build and Review
Time for a model kit build! This steampunk-inspired mechanic…
I would be pretty cautious giving Anovos your money.
I placed an order with them back in July and haven’t heard anything in 5 months. They sent out an email in August stating how they were going to better communicate with their customers, then never sent another word.
I even opened a support ticket two weeks ago asking for any additional details and it has yet to receive any reply at all.
They just posted their current schedule http://www.anovos.com/pages/star-wars-updates.
Is anyone able to help a member out in Australia? I asked them (again) on the schedule for Australian licencing and they told me (again) to wait another 6 months. I need US address and then someone to post over as the re-direct services cost a fortune…
Can’t wait to get mine 😀
Might need to save up for a hand held power saw or something to save my hands ! Lots of cutting on the full kit !
Thanks for the vids..
I don’t suppose Adam is getting one ? be great to see what he’d do with one.
E:)
whats with the ear gaps
I want Frank’s T-Shirt (well not his but one like it)
Is it just me or was the helmet a garyer kind of black than the armour?
I also noticed, but it is a prototype in a different material than the final product, I’m assuming that might be it.
It may be protective plastic, like what was on the rest of the armor.
Haha, at the beginning of the video I was very dissapointed. I though: that looks like crap. But it did turn out very very nice!
Anyone have an idea where Pt. 3 is? I’ve looked everywhere to no avail.
I’ve been getting an email per month since about sep/oct. Thought Anovos was doing a good job seeing how this turned out to be a much better selling product than the thought it would be going in.
Also the 501st have a build thread going that will show you how to put together the Armor and what changes (adjustments) are needed to get it Approved (only a big deal if your looking to Join)
http://www.whitearmor.net/forum/topic/35086-ukswraths-anovos-tk-build/
Anyone know where part 3 is? Can’t seem to find it anywhere